The Hunter Powder Horns are a nicely Antiqued Finished Powder Horn. The base plug is a simple wooden dome with a brass staple to secure the end of the strap. The tip has raised flats to add to the looks and helps secure the Boot Lace strap. The Hunter Horns measure from 11 to 13 inches. A quality horn made in the U.S.A.
Description
Order No.
Price
Order Now
The Hunter Powder Horn
94-429
$67.00
TRADE HORN
A 9 to 12 inch polished horn with wood base and wood stopper in the pouring end. The wood base plug is secured with brass brads. Color varies. Leather carrying thong is included. A quality horn at a great price.
Description
Order No.
Price
Order Now
Pilgram Powder Horn
9" to 12" Long
53-1252
$21.95
POWDER HORN SLING
Powder Horn Strap is made out of a 1 1/4" wide jute and cotton blend webbing with antiqued leather sewn on the ends with adjustable Dee rings. A Brass slider allows for full adjustment of strap. Two Horn Strap also available. Powder Horn not included. By - The Leatherman
Description
Order No.
Price
Order Now
Powder Horn Sling
For One Horn - As Shown
52-PHS-2008-1
$30.00
Powder Horn Sling
For Two Horns - Not Shown
52-PHS-2008-2
$35.00
POWDER HORN SPOUT & PLUG
This powder horn spout & plug are great when you build your own Powder Horn. They are nicely turned and are installed in the pouring end of the powder horn. The spout has a generous pouring hole 3/8" in diameter for hurried reloading such as timed shooting events, hunting, etc. The plug has an "O" ring that creates a friction fit in the spout holding it securely in place with a waterproof seal. A lanyard can be tied to the groove provided on the plug to prevent its loss. Both parts are made of brass. 1/2" end for a press fit into your horn.
Description
Order No.
Price
Order Now
Powder Horn Spout & Plug
12-07-06
$8.95
POWDER HORN BASE PLUG
These brass powder horn base plugs are designed to be installed in the base (large end) of a powder horn . The decorative plug provides a removable plug for easy filling of the horn and a place to tie one end of the horn lanyard. The plug comes with a brass bushing that is permanently installed in the horn base. These plugs are available in two sized. The large one is 5/8" in diameter with a 1/2" - 20 thread. The Small one is 7/16" diameter with a 3/8" - 24 thread.