This is our Fast Flow powder valve fastened to the Goex Black Powder can cap.  Screw this directly onto your black powder can and use it as a ready made flask; no more inconvenience of pouring powder from can to flask or horn. Flask Spouts, listed above, can screw into this safety valve.

 These are our Safety Valves fastened to Goex Black Powder can caps.  Screw this directly onto your black powder can and use it as a ready made flask – no more inconvenience of pouring powder from can to flask or horn.

The “Fast Flow” Powder Valve was designed to provide a faster flow of powder and keep the physical size small.  This valve, when in the open position, has a straight-through 17/64” diameter hole for the fast flow of powder when hunting or participating in timed events.  The body of this fast-flow valve is actually smaller (9/16” diameter) than other valves resulting in a more aesthetically pleasing powder horn installation.  The valves will accept standard flask spouts and our pouring adapter.  The valve has a 3/8 - 24 thread for attachment to a powder horn or container.  Use the valve bushing for a neat installation on a powder horn.  The bushing has a 3/8 - 24 female thread and is meant to be epoxied into the horn.

These two valves are the same design as our Fast Flow Powder Valve.  One has a nose designed to fit into a powder measure and the other is designed to fit the outside of a powder measure.  These valves are made to work with our series #71 fixed powder measures, our 120 grain adjustable powder measure or other powder measures with a similar inside diameter.  To operate, place measure on the valve and open valve for a moment, then withdraw measure and it will be filled level with the top.  Using this valve will prevent spillage and give more uniform powder measuring.