VINTAGE RIFLE TELESCOPES

The second generation Malcolm 6x Long Rifle Telescope is the perfect blend of period correct aesthetics and modern performance. This scope now includes the no-drilling Sliding Dovetail Mount as part of the standard kit, allowing for easy installation onto most single shot long barreled rifles. If your rifle’s barrel has both front and rear sight dovetails, you should be able to mount this scope without any drilling or tapping. For a list of available dovetail sizes, please refer to the chart below. In addition to the Sliding Dovetail Mounts, the Malcolm 6x Long Rifle Telescope (Gen II) features parallax adjustment from 10 yards to infinity, ensuring the target is in sharp focus regardless of the distance.

The Malcolm Long Rifle Telescope (Gen II) comes equipped with a 6x magnification eyepiece, Sliding Dovetail Mounts, and a 5” extended sunshade, providing you with everything you need for optimal performance. The standard 5” sunshade will match the Malcolm 6x Gen 2 long scope with a 30” barrel (measured from the breech). 3”, 7” and 9” sunshades are available and sold separately.

For those seeking even greater magnification, an optional 10x booster eyepiece is available and sold separately. This interchangeable eyepiece boosts the magnification of the Malcolm Gen 2 Parallax Adjustable Long Rifle Telescope to 10X. It is not compatible with previous generation models of the Malcolm 6X long scope or any of the Malcolm short rifle telescopes.

Fine Vintage Riflescopes for Fine Vintage Rifles...William Malcolm is the oldest name in scope manufacturing, originally established in 1855. Malcolm Optics has stepped back in the time to redesign this historic line of telescopic rifle sights, providing today’s shooter a period correct scope with modern optics. The Wm. Malcolm 6X Two Tone Short Rifle Telescope features an improved click-less micrometer rear adjustment mount. This mount is designed to provide spot on 1/4 MOA adjustments when the front and rear mounts are spaced 7.250" from center to center. The scope is also equipped with a sliding lock ring that mitigates the recoil energy going through the optic. Prior to every shot, you will need to pull back on the scope to "reset it to battery." Whether you're shooting BPCR or slinging lead at the range, the Malcolm 6X Two Tone short rifle telescope will have you ringing steel over and over.

Specifications: Magnification: 6X - Objective Lens Diameter: 17mm - Eye Relief: 4" - Field of View: 12 ft @ 100 yards -Tube Size: 3/4" - Length: 18" - Weight: 18 oz - Malcolm 6X Two Tone 6X Rifle Telescope has a polished brass eyepiece and objective housing cap garner attention every time it's at the range

The Malcolm 3X or 6X Short (Gen II) Rifle Telescope features upgraded mounts that boast a square-shaped rear bracket for increased adjustment range and repeatability. This mount is designed to provide spot on 1/4 MOA adjustments when the front and rear mounts are spaced 7.250" from center to center.
The turret adjustment mark ring has been polished for easier reading and more precise adjustments. It also features standardized configuration with crescent cut scope blocks, offering improved compatibility and ease of use.
The scope is also equipped with a sliding lock ring that mitigates the recoil energy going through the optic. Prior to every shot, you will need to pull back on the scope to "reset it to battery." This Scope is ideal for many of the single-shot and lever-action cartridge rifles produced during the late 1880s and 1890s. Two types of short scopes are available - A 3 power that is 17" long and a 6 power that is 18" long. These scopes are a must for your Winchester Model 1885 rifle, H&R “ Buffalo Classic”, Winchester ’73, ’76, ’92 & ‘94 models, Henry “Golden Boy” .22, Marlin ’94 / ’95 models, and others.

Specifications: Magnification: 6X - Objective Lens Diameter: 17mm - Eye Relief: 4" - Field of View: 12 ft @ 100 yards - Tube Size: 3/4" - Length: 18" - Weight: 18 oz

Specifications: Magnification: 3X - Objective Lens Diameter: 17mm - Eye Relief: 4" - Field of View: 15 ft @ 100 yards - Tube Size: 3/4" - Length: 17" - Weight: 17.5 oz

Toby Bridge's Muzzleloader Rifle Scope - Muzzleloading hunters now demand more from their rifles and loads than ever before, and here is a scope designed and built to fully tap all of that performance. The Leatherwood / Hi-Lux “HIGH PERFORMANCE MUZZLELOADING” scope is the idea of today’s leading modern in-line muzzleloading rifle authority – Toby Bridges.
In addition to the primary crosshair, the 3-9x40mm HPML scope features three lower short crosshairs that provide reticles for shooting at longer ranges. The positions of these additional reticles were determined by thousands of rounds fired with today’s more popular saboted muzzleloading bullets at a wide range of velocities.
With a high ballistic coefficient 250 grain polymer tipped spire-point bullet, shot at 1,950 to 2,000 f.p.s., this scope can be sighted “on” at 100 yards, and the lower crossbars will point the load “on” at 200…225… and 250 yards. Each TBML scope will be shipped with a chart that provides points of impact for other popular loads and bullets. 

Specifications: Magnification: 3-9X - Objective Lens Diameter: 40mm - Eye Relief: 3.4" - Field of View: 39' - 13'  ft @ 100 yards - Adjustment Travel Range: 70 MOA - Click Value: 1/4 MOA - Parallax Setting: Fixed at 100 Yards - Tube Size: 1" - Length: 12.5" - Weight: 15.4 oz.

This mount set is to mount the 17” or 18” Malcolm Short Telescopic Sight onto a Winchester 1885 Low and High wall. If you would like to mount the Malcolm 6X Two Tone Rifle Telescope or the Malcolm 8X Sniper, you will need to use the W1885MT-C. This mounting kit is specifically designed for Miroku manufactured predrilled 1885 rifles. The set includes both the front and rear mounts. There is no drilling and tapping required for Miroku manufactured Winchester 1885 rifles.

This mount set is to mount the 17” or 18” Malcolm Short Telescopic Sight onto either a Winchester 1873 or 1876 – Top Ejection Rifle. The set includes both the front and rear mounts. You will not need to drill and tap with this mounting set.
The standard mounting bases have posa cut scope blocks and is not compatible with the Malcolm 6X Two Tone Rifle Telescope or the Malcolm 8X rifle scopes.
The crescent cut mounting bases have both posa and crescent cuts. The W7376MT-C is compatible with all Malcolm short rifle telescopes (including the Malcolm 6X Two Tone) and the Malcolm 8X and 20X scopes.

This mount set is to mount either the 3X 17” or 6X 18” Malcolm Short Telescopic Sight onto either a Winchester 92 or 94 - Top Ejection Rifle. The set includes both the front and rear mount. The rear mount may need to be drilled and tapped. This mount has the posa cuts is not compatible with the Malcolm 6X Two Tone or the Malcolm 8X rifle telescope.

This mount set is to mount either the Malcolm 3X or 6X Short Telescopic Sight to the Marlin '94 or '95 lever action rifle. This mounting kit is also compatible with the Henry Big Boy lever action rifles.
The Marlin '94/'95 mount goes into existing drilled holes on the barrel and the rear dovetail. Thus, no drilling and tapping of the rifle is required. The set includes both the front and rear mounts only.
This mount has both the posa and crescent cuts on the scope blocks. This is compatible with the Malcolm 6X Two Tone Rifle Telescope and the Malcolm 8X rifle scopes.